Can I use a laptop screen with a tablet. Can I use the tablet as a monitor

  1. What you need.
  2. 1. Install iDisplay on your tablet.
  3. 2. Install iDisplay on your computer.
  4. 3. Pairing with the tablet.
  5. 4. Optimization.

(9 Votes)

After installation, when you first start the application, you will be prompted to enter the device name. The device name can be anything, we will use Samsung galaxy Tab. After you have set the device name, leave Redfly ScreenSlider working.

Install the compatible application on the computer

Now, the tablet can be left alone and proceed to the computer. We go to the site and download the program for your computer. After successful installation of ScreenSlider, its icon will appear in the notification area. If you make a left or right click on the ScreenSlider icon, then no reaction will occur, so launch the application through the “Start” menu.

Connect to the tablet

We launched ScreenSlider on the computer, and now we find our tablet - it clicks the link at the top of the “Find Devices” program. If the tablet and computer are on the same network or subnet, and the Redfly ScreenSlider is working, then in a few seconds your tablet will appear in the list of available devices with the specified IP address and the name you specified earlier.

As soon as the tablet was discovered, double click on it. A window with a PIN code will appear on the tablet screen, which you need to enter in the connection screen on your computer. After entering the PIN code, click the OK button and from this moment the tablet will work as the second monitor of your computer, in the extended desktop mode.

Settings

By default, ScreenSlider sets the tablet in extended desktop mode and assumes that it is located to the right of the main monitor. To change these parameters, launch ScreenSlider on the computer, select the “Settings” menu and here you can change parameter settings, such as the position of the tablet, etc.

disadvantages

Using a tablet as a second monitor provides many advantages, but there are some rough edges. When ScreenSlider is in active mode, Windows 7 Aero does not work. In addition, performance this application speed dependent Wifi connection . Sometimes there is a correct display of some programs, for example, Internet Explorer.

But if all these side effects are not critical for you, then you get a pretty good result. The main thing is not to be afraid to try and experiment, and then you will succeed!

Tablets are good not only for a weekend viewing of a new series of your favorite miniseries or fake news on a common Facebook channel. It can also work as a second display.

Two displays for one computer can provide you with more space for viewing documents spreadsheets and web pages. If you already have an Android tablet, then why not? It is cheaper than buying an additional monitor and only requires downloading a couple of applications.

There are several applications that allow you to do this, but for the purposes of this article, I chose iDisplay, because it has options for different platforms.

What you need.

  • Wi-Fi network.
  • Android tablet running running Android 2.01 or later, or iPad with iOS 7 or later.
  • Pc with operating system Windows XP, Vista or 7 (32-bit or 64-bit) or Mac computer with OS X Mavericks 10.9 or later.

1. Install iDisplay on your tablet.

You can easily find the application in the Play Store (419 rubles) or in Appstore (1490 rubles). Although these applications are not free, they are cheaper than the new monitor. After installation and opening, you will see one option - connect via USB. (I found that this method does not work reliably.) To connect instead via Wi-Fi, you must download iDisplay for the computer (see step 2) before showing this option. When connecting via Wi-Fi, you need to make sure that both the tablet and the computer are connected to the same network.

2. Install iDisplay on your computer.

iDisplay is available for Windows and Mac, and both versions work the same way. After downloading, you can install software just a few clicks. After installation, you will need to restart the computer.

3. Pairing with the tablet.

After the reboot, click on the iDisplay launch icon. When using a Windows computer, you may be prompted to exclude Windows Firewall. After granting permission and making sure both devices are connected to one wireless network - you can establish a connection between the tablet and the computer.

When you try to connect, a dialog box appears, and you can either allow iDisplay to connect to the tablet only once, always allow it to connect, or reject it. If you plan to use it often, select "always allow".


If you plan to use it often, select always allow


The application on the tablet will display a list of devices with which the tablet can connect. Select the device you want to pair with, then connect the tablet to your computer.

4. Optimization.

After connecting, you can adjust the display size. On the settings page (gear icon in the upper right corner of the connection page in the iDisplay application on the tablet), you can choose one of four different resolutions. Higher resolution works better on a small tablet. (Selecting a lower resolution will display windows with huge text and images.)

On the computer, you can also right-click on the system tray icon to close iDisplay or display the “Display Arrangement” option, which allows you to choose where you want the tablet to be placed relative to the main display.

The performance of the tablet's display may vary depending on the speed of connection to Wi-Fi (a fast network will improve the response of the display), as well as the speed of the processor and graphics capabilities of the tablet.

There are several applications that turn an Android tablet into an additional touchscreen monitor to a Windows PC. They mainly work via Wi-Fi, which means both devices must be on the same subnet.

What is it for?

Touch mini-monitor can be used to test the convenience of applications under the touch control, can be used as a terminal for complex "heavy" calculations with which the tablet can not cope, as an application control panel, or a screen for gadgets and statistics.

Applications are focused on Android 3.01 or newer, as well as Windows XP (32 bit) or Windows 7 (32 or 64 bit).
iDisplay

To install on a computer, go to the ScreenSlider website and download the program for your OS version. After successful installation of ScreenSlider, its icon will appear in the notification area. If you make a left or right click on the ScreenSlider icon, then no reaction will occur, so start the application through the Start menu.

The Android app is sold on Google Play for $ 0.99 (for informational purposes only).


After installation on the tablet, when you first start the application, you will be prompted to enter the name of the device.

Making a connection

From the ScreenSlider application on the computer, we find our tablet using the link at the top of the “Find Devices” program. If the tablet and computer are on the same network or subnet, and the Redfly ScreenSlider is working, then in a few seconds your tablet will appear in the list of available devices with the specified IP address and the name you specified earlier.

Once the tablet has been found, double click on it. A window with a PIN code will appear on the tablet screen, which you need to enter in the connection screen on your computer. After entering the PIN code, click the OK button and from this moment the tablet will work as the second monitor of your computer, in the extended desktop mode.

Settings

By default, ScreenSlider sets the tablet in extended desktop mode and assumes that it is located to the right of the main monitor. To change these parameters, launch ScreenSlider on the computer, select the “Settings” menu and here you can change parameter settings, such as the position of the tablet, etc.

Monitor for the camera do it yourself. Only three thousand rubles.

Not because there is no possibility to buy a normal monitor, but because I like many things and want to do it myself, I decided to make a monitor for the camera with the ability to connect via HDMI.
At first there was a thought to simply connect the tablet to the camera, but the existing interfaces (WiFi and USB) in operation give a delay and low resolution. And the HDMI connector that exists on the tablets can only work as an output, and as an input, it will not work either. This is not implemented at the hardware level.

Therefore, I found the information that you can directly connect an HDMI controller to the tablet matrix, which will work with this matrix and receive the signal via HDMI.

Spent a lot of time choosing a tablet (from those that you can buy is not expensive for ads). I wanted to do the minimum size, but at the same time, the maximum resolution. I considered that the size 7 "is ideal, the matrix N070ICG-LD4 is IPS, the resolution is 1280 * 800. The most affordable tablet with this matrix is ​​Texet TM-7043XD, I bought it for 1tr + shipping from Peter 200rub. It did not have a touch, but the glass and the matrix itself were intact.

From the tablet only the matrix works, as the tablet it will no longer work, it is powered from the controller. This begs the question: whether or not to buy only the matrix? It can be found for 500-700 rubles. But the matrix will have to be placed somewhere (the case is needed) and you need a protective glass (touch screen), so buying a tablet, we take everything you need at once. In theory, a battery for a tablet can be powered for the same monitor (through a driver that increases the voltage, the issue price is 100 rubles), but Canon batteries are more practical since they can be changed quickly.

For those who need a high resolution, I found such a display only in 10 "" tablets. The most budget is Acer iconia Tab A700 or A701 with a resolution of 1920 * 1200, it can be purchased for about 3000 rubles.

The Chinese sell a lot of controllers for mobile matrix, you need to watch with LVDS connection! I took this one (after having written off with the seller about the possibility of the controller firmware for my matrix).
The Chinese sell a lot of controllers for mobile matrix, you need to watch with LVDS connection

The cost of the controller is approximately 1500r with delivery. With the controller comes a mini keyboard through which you can select the input and adjust the display (brightness / contrast / color, etc.). Bought.

Here is a funny device as a result.
Here is a funny device as a result

Power can be attached any, I attached the adapter for batteries LP-E6 (popular canon batteries). One battery lasts for 2 hours of continuous operation.
Power can be attached any, I attached the adapter for batteries LP-E6 (popular canon batteries)

The fastener was attached to the Go Pro camera (which was at hand).
The fastener was attached to the Go Pro camera (which was at hand)

The housing for the controller did not, there were no suitable parts, and then it cooled down.

The total price of the issue was about 3 thousand rubles. I have been using the monitor regularly for a year now (when shooting with a tripod), it is very convenient to focus. It looks something like this (I already broke the glass of the wheel).
The total price of the issue was about 3 thousand rubles

The monitor displays everything that is given by the camera via hdmi, my camera (Samsung NX1) has several display modes. There is an opportunity for hdmi to give a clean signal, without overhead information, but it is possible from the service one. The camera screen does not turn off when the monitor is connected (camera features), but it can fall asleep if you do not press the buttons on the camera for 30 seconds, external monitor while still remains active.
The monitor displays everything that is given by the camera via hdmi, my camera (Samsung NX1) has several display modes

If you already have an Android tablet, then why not?
What is it for?
This begs the question: whether or not to buy only the matrix?